Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 55 van 57
50
5. Indoor extension settings
Tap Settings
More Settings
Configuration in the indoor station. Then enter the password of Admin to enter the following
interface. Set the indoor station type (it should be set to “Indoor Extension”), number (ranging from 1 to 5), IP address of the indoor
station.
Note：For one indoor station, up to 5 indoor extensions can be configured. The indoor station number is 0 by default.
6. Call indoor stations through your main door station or sub door stations (See Call Resident for calling details). All indoor stations
(including indoor station and extensions) will respond at the same time.
Appendix 2 Troubleshooting
IP Scanner does not show any device.
Make sure that the PC that’s running Blue Scanner is on the same local network as the devices.
Internet Explorer cannot download ActiveX control.
IE browser may be set up to block ActiveX. Follow the steps below.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
