Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 54 van 57
49
The setting steps are as follows:
1. Connect your door stations and indoor stations to the same local network and then set their network parameters to the same
network segment.
2. Main door station settings
Log in the web client of the door station. Click Config
Intercom
Number Configuration to go to the following interface. Set the
device type to “Main Door Station”.
3. Sub door station settings
Log in the web client of the door station. Click Config
Intercom
Number Configuration to go to the following interface. Set the
device type to “Sub Door Station”.
Enter the actual IP address of the main door station and door station no.
Door Station No.: enter the sub door station number (ranging from 1 to 99; 0 is main station number by default). Different sub door
stations should have different door station number.
4. Indoor station settings
Tap Settings
More Settings
Configuration in the indoor station. Then enter the password of Admin to enter the following
interface. Set the indoor station type (it should be set to “Indoor station”), room number, IP address of the main door station.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
