Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 35 van 57
30
5.13.6 802.1x
If it is enabled, the camera’s data can be protected. When the camera is connected to the network protected by the IEE802.1x, user
authentication is needed.
To use this function, the camera shall be connected to a switch supporting the 802.1x protocol. The switch can be reckoned as an
authentication system to identify the device in a local network. If the camera connected to the network interface of the switch has
passed the authentication of the switch, it can be accessed via the local network.
Protocol type and EAPOL version: Please use the default settings.
Username and password: The username and password must be the same as the user name and password applied for and registered
in the authentication server.
5.13.7 RTSP
Go to NetworkPorts/ConnectionsRTSP.
Select “Enable” to enable the RTSP function.
Port: Access port of the streaming media. The default number is 554.
RTSP Address: The RTSP address (unicast) format that can be used to play the stream in a media player.
Multicast Address
Mainstream: The address format is
“rtsp://IP address: rtsp port/profile1?transportmode=mcast”.
Substream: The address format is
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
