Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 34 van 57
29
1. Check “Enable”.
2. Check the IP address and port of the transfer media server in the VMS. Then enable the auto report in the VMS when adding a
new device. Next, enter the remaining information of the device in the VMS. After that, the system will automatically allot a device
ID. Please check it in the VMS.
3. Enter the above-mentioned server address, server port and device ID in the corresponding boxes. Click the “Save” button to save
the settings.
5.13.4 Onvif
The camera can be searched and connected to the third-party platform via ONVIF/RTSP protocol.
Note: when adding the device to the third-party platform with ONVIF/RTSP protocol, please enter the username and password
created in the above interface.
5.13.5 DDNS
If the camera is set up with a DHCP connection, DDNS should be set for accessing the camera from the internet.
1. Go to NetworkPorts/Connections DDNS.
2. Enable, save and use DDNS to log in.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
