Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 33 van 57
28
built in, and therefore can assign an IP address to the camera.
Use PPPoE-Click the “PPPoE Config” tab to go to the interface as shown below. Enable PPPoE and then enter the username and
password from your ISP.
Method of network connection can be used. If PPPoE is used to connect to the internet, the camera will get a dynamic WAN IP
address. This IP address will change frequently. To be notified, the IP change notification function can be used.
Click “IP Change Notification Config” to go to the interface as shown below.
Trigger Email: when the IP address of the device is changed, the new IP address will be sent to the email address that has been set
up.
Trigger FTP: when the IP address of the device is changed, the new IP address will be sent to the FTP server that has been set up.
5.13.2 Port
Go to NetworkPorts/Connections as shown below. HTTP port, Data port, and RTSP port can be set.
HTTP Port: The default HTTP port is 80. It can be changed to any port which is not occupied.
HTTPS Port: The default HTTPs port is 443. It can be changed to any port which is not occupied.
Data Port: The default data port is 9008. Please change it as necessary.
RTSP Port: The default port is 554. Please change it as necessary.
Persistent Connection Port: The port is used for a persistent connection of the third-party platform to push smart data, like face
pictures.
WebSocket Port: Communication protocol port for plug-in free preview.
5.13.3 Server Configuration
This function is mainly used for connecting network video management systems.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
