Speco Technologies O2DB1 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657/ 57

Afdrukken

Je bekijkt pagina 32 van 57

27

4. Set the schedule of the sensor alarm. The setup steps of the schedule are the same as the schedule recording setup. (See

Schedule Recording

).

5.12.4 Person Detection

Alarms will be triggered when the camera detects a person. Go to ConfigAlarm Person Detection.

1. Enable person detection and then set the alarm holding time.

2. Set alarm trigger options. The setup steps are the same as the alarm trigger settings of motion detection.

3. Set the schedule of person detection. The setup steps of schedule are the same as the schedule recording (See

Schedule

Recording).

5.13 Network Configuration

5.13.1 TCP/IP

Go to NetworkTCP/IP interface as shown below. There are two ways for network connection.

Use IP address (take IPv4 for example)-obtain a local IP address automatically through DHCP. A typical router has a DHCP server

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657/ 57

Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Gerelateerde producten van Speco Technologies (Niet gecategoriseerd)

Handleiding bekijken

Speco Technologies O12MDP4

Niet gecategoriseerd - handleiding

Handleiding bekijken

Speco Technologies O6MDP4

Niet gecategoriseerd - handleiding

Andere merken in Niet gecategoriseerd