Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 30 van 57
25
Trigger Email: If “Trigger Email” and “Attach Picture” are checked (email address must be set first in the Email configuration
interface), the captured pictures and triggered event will be sent into those addresses.
Trigger FTP: If “Trigger FTP” is checked, the captured pictures will be sent into FTP server address. Please refer to FTP configuration
chapter for more details.
3. Click “Save” button to save the settings.
4. Set the sensitivity of the exception detection. Click “Sensitivity” tab to go to the interface as shown below.
Drag the slider to set the sensitivity value or directly enter the sensitivity value in the textbox. Click “Save” button to save the
settings.
The sensitivity value of Scene Change Detection: The higher the value is, the more sensitive the system responds to the amplitude
of the scene change.
The sensitivity value of Video Blur Detection: The higher the value is, the more sensitive the system responds to the blurriness of
the image.
The sensitivity value of Abnormal Color Detection: The higher the value is, the more sensitive the system responds to the color shift
of the image.
Note: Try not to enable exception detection when light changes greatly in the scene.
5.12.2 Motion Detection
Go to AlarmMotion Detection to set the motion detection alarm.
1. Check “Enable” check box to activate motion-based alarms. If unchecked, the camera will not send out any signals to trigger
motion-based recording to the NVR or CMS, even if there is motion in the video.
Alarm Holding Time: it refers to the time that the alarm extends for after an alarm ends. For instance, if the alarm holding time is set
to 20 seconds, once the camera detects a motion, it will go to alarm and would not detect any other motion in 20 seconds. If there is
another motion detected during this period, it will be considered as continuous movement; otherwise, it will be considered as a
single motion.
Trigger Audio Alarm: If selected, the camera will play the pre-defined warning voice on detecting a motion-based alarm.
Trigger SD Card Snapshot: If selected, the system will capture images on motion detection and save the images on an SD card.
Trigger SD Card Recording: If selected, video will be recorded on an SD card on motion detection.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
