Speco Technologies O12MDP4 handleiding
Handleiding
Je bekijkt pagina 32 van 57
28
2. Set the alarm holding time and alarm trigger options.
3. Set the alarm area of the region exiting detection.
4. Set the schedule of the region exiting detection.
The setup steps of the region exiting detection are the same as the region intrusion detection setup (See Region Intrusion for
details).
4.4.5 Target Counting by Line
This function is used to detect, track and count the number of people or vehicles crossing the set alarm line.
1. Go to ConfigEventTarget Counting by Line as shown below.
2. Enable target counting and select the snapshot type and the detection target.
Detection Target: Select the target to calculate. Human, motor vehicle and motorcycle/bicycle can be selected.
Note: When the installation method is set to “Ceiling”, only “Human” can be selected.
Staying Threshold: When the targets (human/vehicle) staying in the specified area exceed the threshold, alarms will be triggered.
Push target trajectory with a persistent connection: Push target trajectory (moving coordinate) to API test tool with a persistent
connection. If enabled, the system will push the target trajectory upon detecting a target. If disabled, the system will push the target
trajectory only when triggering target counting by line.
Close Event Snapshot: if enabled, the pictures that are captured when counting targets will be neither saved to an SD card/local PC
nor pushed to the NVR/APP/VMS platform/….
Counting Reset: The current number of the target counting can be reset. You can choose to reset the counting daily, weekly or
monthly. Click “Reset” to manually reset the current number of crossing line people/motor vehicle/non-motor vehicle counting.
3. Set alarm trigger options. The setup steps are the same as motion detection. Please refer to motion detection section for details.
4. Set the area of the target counting. Click the “Area” tab to go to the interface as shown below.
Note: The image display may be different due to different installation modes. The following picture is for reference only.
Bekijk gratis de handleiding van Speco Technologies O12MDP4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O12MDP4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13996 MB |
