Speco Technologies O12MDP4 handleiding
Handleiding
Je bekijkt pagina 30 van 57
26
1. Enable intrusion alarm and select the snapshot type and the detection target.
Save Original Picture: If it is enabled, the detected original pictures will be captured and saved to the SD card when the target
intrudes into the pre-defined areas.
Save Target Picture: If it is enabled, the detected target cutout pictures will be captured and saved to the SD card when the target
intrudes into the pre-defined areas.
Note: To save snapshots to the local PC, please enable “Local Smart Snapshot Storage” in the local config interface first. To save
snapshots to the SD card, please install an SD card first.
Detection Target:
Human: Select it and then alarms will be triggered if someone intrudes into the pre-defined area.
Motor Vehicle: Select it and then alarms will be triggered if a vehicle with four or more wheels (eg. a car, bus or truck) intrudes into
the pre-defined area.
Non-motor Vehicle: Select it and then alarms will be triggered if a vehicle with two wheels (eg. a motorcycle or bicycle) intrudes into
the pre-defined area.
Note: When the installation method is set to “Ceiling”, only “Human” can be selected.
All of the three types of objects can be selected simultaneously. Please select the detection objects as needed. If no object/target is
selected, alarms will not be triggered even if intrusion detection is enabled.
Push target trajectory with a persistent connection: Push target trajectory (moving coordinate) to API test tool with a persistent
connection. If enabled, the system will push the target trajectory upon detecting a target. If disabled, the system will push the target
trajectory only when triggering region intrusion alarm.
2. Set the alarm holding time.
3. Set alarm trigger options. The setup steps are the same as motion detection alarm. Please refer to motion detection section for
Bekijk gratis de handleiding van Speco Technologies O12MDP4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O12MDP4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13996 MB |
