Speco Technologies O12MDP4 handleiding
Handleiding
Je bekijkt pagina 28 van 57
24
1. Enable line crossing alarm and select the snapshot type and the detection target.
Save Original Picture To SD Card: If it is enabled, the detected original pictures will be captured and saved to the SD card when
there are targets detected.
Save Target Picture To SD Card: If it is enabled, the detected target cutout pictures will be captured and saved to the SD card when
there are targets detected.
Note: To save images to a local PC, please enable the local smart snapshot storage first (SystemLocal Recording). To save images to
an SD card, please install an SD card first.
Detection Target:
Human: Select it and then alarms will be triggered if someone crosses the pre-defined alarm line.
Motor Vehicle: Select it and then alarms will be triggered if a vehicle with four or more wheels (eg. a car, bus or truck) crosses the
pre-defined alarm line.
Non-motor Vehicle: Select it and then alarms will be triggered if a vehicle with two wheels (eg. a motorcycle or bicycle) crosses the
pre-defined alarm line.
Note: When the installation method is set to “Ceiling”, only “Human” can be selected.
All of the three types of objects can be selected simultaneously. Please select the detection objects as needed. If no object/target is
selected, alarms will not be triggered even if line crossing detection is enabled.
Push target trajectory with a persistent connection: Push target trajectory (moving coordinate) to API test tool with a persistent
connection. If enabled, the system will push the target trajectory upon detecting a target. If disabled, the system will push the target
trajectory only when triggering line crossing alarm.
2. Set the alarm holding time.
3. Set alarm trigger options. The setup steps are the same as motion detection alarm. Please refer to motion detection section for
details.
Bekijk gratis de handleiding van Speco Technologies O12MDP4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O12MDP4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13996 MB |
