Speco Technologies O12MDP4 handleiding
Handleiding
Je bekijkt pagina 18 van 57
14
Day/Night Mode: Choose “Auto”, “Day”, “Night” or “Timing”.
Shutter: Set the upper limit of the effective exposure time. The exposure time will be automatically adjusted (within the set shutter
limit value) according to the actual situation.
Gain: Set the upper limit of the gain. The gain value will be automatically adjusted (within the set gain limit value) according to the
actual situation.
Frequency: 50Hz and 60Hz can be optional.
Infra-red Mode: Choose “Auto”, “ON” or “OFF”.
Image Mirror: Turn the current video image horizontally.
Image Flip: Turn the current video image vertically.
Note: For some items, if selected/enabled, the camera will reboot automatically. After that, clicking “Default” button will not take
effect.
Schedule Settings of Image Parameters:
Click the “Profile Management” tab as shown below.
Set full time schedule for common, auto mode and specified time schedule for day and night. Choose “Timing” in the drop-down box
of schedule as shown below.
Drag “ ” icons to set the time of day and night. Blue means day time and blank means night time. If the current mode of camera
parameters is set to “Timing”, the image configuration mode will automatically switch between day and night according to the
schedule.
4.2.2 Video / Audio Configuration
Go to ImageVideo / Audio interface as shown below. In this interface, set the resolution, frame rate, bitrate type, video quality
and so on subject to the actual network condition.
Bekijk gratis de handleiding van Speco Technologies O12MDP4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O12MDP4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13996 MB |
