Spear & Jackson SCBV36 handleiding
Handleiding
Je bekijkt pagina 8 van 32
8 of 32 V2.5: 10/23AFTER SALES SUPPORT 0345 605 2067
SAFETY INFORMATION
Please read these instructions fully before operating or maintaining your machine
or vibration, immediately
shut off the power source
and allow the machine to
stop. Remove the battery
pack from the machine
and take the following
steps before restarting and
operating the machine:
-inspect for damage;
-replace or repair any
damaged parts;
-check for and tighten any
loose parts.
■
Do not allow processed
material to build up in the
discharge zone; this may
prevent proper discharge
and can result in kickback
of material through the
intake opening.
■
If the machine becomes
clogged, shut-off the
power source and remove
the battery pack from the
machine before cleaning
debris.
■
Never operate the machine
with defective guards or
shields, or without safety
devices, for example
debris collector in place.
■
Keep the power source
clean of debris and other
accumulations to prevent
damage to the power
source or possible fire.
■
Do not transport this
machine while the power
source is running.
■
Always disconnect the
machine from the power
supply (e.g. remove the
battery pack from the
machine).Make sure that
all moving parts have
come to a complete stop
-whenever you leave the
machine,
-before clearing blockages
or unclogging chute,
-before checking ,cleaning
or working on the
machine.
■
Avoid using the machine
in bad weather conditions
especially when there is a
risk of lightning.
Bekijk gratis de handleiding van Spear & Jackson SCBV36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Spear & Jackson |
| Model | SCBV36 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3045 MB |
