Spear & Jackson S7520EPSP handleiding
Handleiding
Je bekijkt pagina 24 van 25
24 AFTER SALES SUPPORT 0345 605 2067 of 25 V3.5: 11/23
TROUBLESHOOTING
Suspected malfunctions are often due to causes that the users can x themselves.
Therefore check the product using this section. In most cases the problem can be
solved quickly.
WARNING! Only perform the steps described within these instructions! All
further inspection, maintenance and repair work must be performed by an
authorised service centre (call the helpline on 0345 605 2067) if you cannot
solve the problem yourself!
Always switch the product off, disconnect it from power supply and let
the product cool down before performing any inspection maintenance or
cleaning.
Fault
Possible Cause Solution
Motor does not run
No electricity Check socket, cables and
plugs. Damaged cable: Have
repairedby a service agent. Do
not patchcables with insulation
tape. Damaged switch: Have
repaired by a service agent. See
section on chain brake ensure
connector rm.
Worn carbon brushes Carbon brushes need replacing
Poor cutting performance
Blunt saw chain
Replace the saw chain
Chain tension
Check chain tension
Saw chain tted
incorrectly
Check saw chain
Chain jumps off guide bar Chain tension Check chain tension
Chain works with difculty Chain tension Check chain tension
Chain becomes hot Chain lubricant Check oil level
Check chain lubrication
Bekijk gratis de handleiding van Spear & Jackson S7520EPSP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Spear & Jackson |
| Model | S7520EPSP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2374 MB |
