Sophos SD-RED 60 handleiding

Handleiding

1234567891011121314151617181920212223242526272829303132/ 32

Afdrukken

Je bekijkt pagina 5 van 32

4Quick Start Guide SD-RED 60

4. Connecting PoE Powered Devices

Ports LAN1 and LAN3 are able to provide power over Ethernet (PoE) to a connected PoE device which

conforms to the standards 802.3af (max. 15.4W) or 802.3at (max. 30W). Each port can provide up to

30 watts max. However, if PoE power is provided to both ports concurrently then the total power drawn

should not exceed 30 watts. So, you can connect either one 802.3at or two 802.3af devices at the same

time as shown below:

Powered Ports LAN1 LAN3

Option 1 max. 15.4 watts max. 15.4 watts

Option 2 Max. 30 watts None

Option 3 None Max. 30 watts

Please consult the documentation of your powered device to identify its correct power class.

Important note: If you accidentally connect one 802.3at and one other 802.3at, or 802.3af device at the

same time, power for the device on LAN3 (lower priority) will be disabled and the connected device will

lose power. The PoE LED of this port will start blinking, indicating a PoE power error, until you remove one

of the devices from the LAN1 or LAN3 port (please also see PoE LED table below).

5. Device LED Codes

Power and Port LEDs

Power LEDs

Power 1 Green Power Supply 1 Active

Red Power Supply 1 Failure

Power 2 Green Power Supply 2 Active

Red Power Supply 2 Failure

1234567891011121314151617181920212223242526272829303132/ 32

Bekijk gratis de handleiding van Sophos SD-RED 60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Niet gecategoriseerd