Handleiding
Je bekijkt pagina 8 van 65
8
Do not connect the OUT and IN connectors to a
hub. The input/output signals for these
connectors are unique to the product and are not
Ethernet signals. In particular, be aware that
connecting these connectors to a PoE injector
hub may result in damage to the product.
Cabinet joi
nts
Connect to other Display Cabinets.
ZRD-CH12D/ZRD-CH15D/ZRD-BH12D/ZRD-
BH1
5D: There are two cabinet joints on the
right side, left side, top and bottom.
ZRD-C12A/ZRD-C15A/ZRD-B12A/ZRD-
B15A:
There is one cabinet joint on the right
side, one on the left side, two on top, and two
on the bottom.
PW
R OUT (AC power output) connector
(ZRD-CH12D/ZRD-CH15D/ZRD-BH12D/ZRD-
BH1
5D)
OUT
(AC power output) connector
(ZRD-C12A/ZRD-C15A/ZRD-B12A/ZRD-
B1
5A)
Use a power cord (not supplied) to connect
t
his connector to the PWR IN (AC power
input) connector or IN (AC power input)
connector on the succeeding Display Cabinet
in the daisy-chain connection.
This connector is not used for the last Display
Cab
inet in the daisy-chain connection.
PWR I
N (AC power input) connector
(ZRD-CH12D/ZRD-CH15D/ZRD-BH12D/ZRD-
BH1
5D)
I
N (AC power input) connector
(ZRD-C12A/ZRD-C15A/ZRD-B12A/ZRD-
B1
5A)
Use a power cord (not supplied) to connect
t
his connector to the PWR OUT (AC power
output) connector or OUT (AC power
output) connector on the preceding Display
Cabinet in the daisy-chain connection.
For the first Display Cabinet in the daisy-chain
co
nnection, use a power cord (not supplied)
to connect this connector to the circuit
breaker.
OUT (c
abinet output) connector (RJ-45)
Use a Category 7 cable (not supplied) to
c
onnect this connector to the IN (cabinet
input) connector on the succeeding Display
Cabinet in the daisy-chain connection.
This connector is not used for the last Display
Cab
inet in the daisy-chain connection.
IN
(cabinet input) connector (RJ-45)
Use a Category 7 cable (not supplied) to
c
onnect this connector to the OUT (cabinet
output) connector on the preceding Display
Cabinet in the daisy-chain connection.
For the first Display Cabinet in the daisy-chain
c
onnection, use a Category 7 cable (not
supplied) to connect this connector to the
OUTPUT connector on the Display Controller.
POWER indicator (ZRD-CH12D/ZRD-CH15D/
ZRD-BH12D/ZRD-BH15D only)
Indicates the power supply status of the
Disp
lay Cabinet.
When the Display Cabinet does not work
pr
operly after turning the power off and on,
contact your local Sony representative.
STATUS indicator (ZRD-CH12D/ZRD-CH15D/
ZRD-BH12D/ZRD-BH15D only)
Indicates the system status of the Display
Ca
binet.
For details, see “Troubleshooting” (page 27)
and “Error Codes” (page 29).
Caution
Indicator Status
Off The Display Cabinet is
tur
ned off.
Lit red The Display Cabinet is in
st
andby mode.
Lit orange Power error occurred on the
Di
splay Cabinet.
Lit green The Display Cabinet is
t
urned on (normal operating
status).
Indicator Status
Off The Display Cabinet is in
st
andby mode.
Blinking red An error occurred on the
Di
splay Cabinet.
Lit orange The Display Cabinet is
tur
ned off.
Blinking orange A warning occurred on the
Di
splay Cabinet.
Lit green The Display Cabinet is
t
urned on (normal operating
status).
Bekijk gratis de handleiding van Sony ZRA-BH12DSM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | ZRA-BH12DSM |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 8767 MB |
