Handleiding
Je bekijkt pagina 29 van 98
Hint
As long as the BLUETOOTH function is activated on a BLUETOOTH device that has previously been connected with the speaker,
the speaker is reconnected with the device right after the speaker is turned on.
The above instructions on the BLUETOOTH device are provided as an example. For details, refer to the operating instructions
supplied with the BLUETOOTH device.
With the “Sound Connect” app, you can adjust various settings such as the following.
Establishing or disconnecting BLUETOOTH connections
Unpairing BLUETOOTH devices
You can connect the speaker concurrently with up to 2 BLUETOOTH devices. (Multipoint connection)
Note
The pairing mode of the speaker is released after about 5 minutes. Then, the BLUETOOTH indicator on the speaker flashes
slowly. However, when the speaker has no pairing information, such as at the factory settings, the pairing mode is not released. If
the pairing mode is released before finishing the process, repeat from step 3.
The passkey of the speaker is “0000.” If a passkey besides “0000” is set on the BLUETOOTH device, pairing cannot be done with
the speaker.
Once the BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases:
Pairing information has been deleted after repair, etc.
The speaker is already paired with 8 devices and another device is to be paired.
The speaker can be paired with up to 8 devices. When a new device is paired in addition to 8 paired devices, the pairing
information of the earliest device connected via a BLUETOOTH connection is replaced by the information of the new one.
The pairing information with the speaker has been deleted from the BLUETOOTH device.
The speaker is initialized.
All pairing information will be deleted. If you initialize the speaker, it may not be able to connect your BLUETOOTH device. In
this case, erase the pairing information of the speaker on your BLUETOOTH device, and then perform the pairing procedure
again.
The speaker can be paired with multiple devices, but can only play music from one paired device at a time.
When using the Stereo Pair function or the Party Connect function, you cannot use the multipoint connection capability.
Related Topic
If the BLUETOOTH connection is not established, repeat from step 3.
29
Bekijk gratis de handleiding van Sony ULT FIELD 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | ULT FIELD 3 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 10236 MB |
