Sony Trimaster HX BVM-HX1710N handleiding

Monitor

Sony

164 pagina's

PDF beschikbaar

Handleiding

Precaution

On Safety

 Operate the unit only with a power source as

specified in the “Specifications” section.

 A nameplate indicating operating voltage, etc.,

is located on the rear panel.

 Should any solid object or liquid fall into the

cabinet, unplug the unit and have it checked by

qualified personnel before operating it any

further.

 Do not drop or place heavy objects on the

power cord. If the power cord is damaged, turn

off the power immediately. It is dangerous to

use the unit with a damaged power cord.

 Unplug the unit from the wall outlet if it is not

to be used for several days or more.

 Disconnect the power cord from the AC outlet

by grasping the plug, not by pulling the cord.

 The socket-outlet shall be installed near the

equipment and shall be easily accessible.

On Installation

 Allow adequate air circulation to prevent

internal heat build-up.

Do not place the unit on surfaces (rugs,

blanke

ts, etc.) or near materials (curtains,

draperies) that may block the ventilation holes.

 Do not install the unit in a location near heat

sources such as radiators or air ducts, or in a

place subject to direct sunlight, excessive dust,

mechanical vibration or shock.

When installing the installation space must be

cur

ed in consideration of the ventilation and

service operation.

 Do not block the ventilation slots and vents of

the fans.

 Leave a space around the unit for ventilation.

 Leave more than 40 cm of space in the rear of

the unit to secure the operation area.

When installing on a flat surface such as a desk,

ensur

e the following space.

BVM-HX3110

Reserve a space of 10 cm or more on the left side

the right side, and 10 cm or more on the top.

BVM-HX1710/HX1710N

Reserve a space of 10 cm or more on the left side

d t

e right side, and 4.4 cm or more on the top.

On Wiring

Do not forcibly wire cables and the AC power

cord to the front of the monitor. Doing so may

overload the contact point of a plug.

Connecting to Other Devices

When connecting this unit to other devices, turn

off this unit and the other devices beforehand.

Connecting while turned on may cause a

malfunction to this unit and the other devices.

Handling the Screen

 The LCD panel fitted to this unit is

manufactured with high precision technology,

giving a functioning pixel ratio of at least

99.99%. Thus a very small proportion of pixels

may be “stuck”, either always off (black),

always on (red, green, or blue), or flashing. In

addition, over a long period of use, because of

the physical characteristics of the liquid crystal

display, such “stuck” pixels may appear

spontaneously. These problems are not a

malfunction.

 Do not leave the screen facing the sun as it can

damage the screen. Take care when you place

the unit by a window.

 Do not push or scratch the monitor’s screen. Do

not place a heavy object on the monitor’s

screen. This may cause the screen to lose

uniformity.

 Make sure to use the unit without the panel-

guard plate during power distribution.

Otherwise, panel failure may result due to

temperature increase of the panel.

 The screen and the cabinet become warm

during operation. This is not a malfunction.

On the Screen Saver

This unit has a screen saver function to reduce

burn-in. When “Screen Saver” in “System

Setting” is set to “On”, the screen brightness is

reduced when an almost static image is

displayed for the amount of time set in “Time”.

Bekijk gratis de handleiding van Sony Trimaster HX BVM-HX1710N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.