Sony Sonic Surf VR handleiding
Handleiding
Je bekijkt pagina 4 van 24
4
Related Devices
Player PC
PCs with RYZ-PSW Player software installed.
Supplied accessories
PC (1)
Keyboard (1)
Mouse (1)
Audio input/output connectors
MADI input/outputs (3) (2 optical + 1 coaxial)
Stereo analog output (1)
Word clock input/output (1)
RYZ-CU164 Control Unit
Front panel
Rear panel
a Front panel mounting screws
These screws are used to attach the front panel. Remove
these screws to remove the front panel to access the DIP
switches.
b Power switch
Use to turn the control unit on/off.
c DIP switches
Use to switch to setup mode, select MADI inputs, and set the
IP address.
The DIP switches are located behind the front panel. Remove
the four front panel mounting screws to access the DIP
switches.
For details about the DIP switch settings, see “Configuring a
Control Unit” (page 6).
d POWER lamp
Lights up green when the control unit is turned on.
e ALERT lamp
Flashes red when an error occurs in the control unit or with a
connected RYZ-AS108 Multi-Channel Active Speaker.
f Feet
Use when not mounting in a rack, for example, on a shelf.
Remove the feet if mounting the unit in a rack.
g PC UI connector (RJ-45)
Connect to network on which the Player PC is connected. It
outputs the status of the control unit.
In setup mode, use to configure the control unit by connecting
directly to the setup PC.
h WORD SYNC OUT connector (BNC)
Outputs a signal synchronized to the WORD SYNC signal
used within the control unit.
i WORD SYNC IN connector (BNC)
Input a WORD SYNC signal from a word clock generator.
j 75
Ω switch / lamp
Set the type of termination for the WORD SYNC IN connector.
The lamp lights up when the 75 Ω termination is active.
ON: Sets to 75 Ω.
OFF: Sets to high impedance.
When set to ON and there is no signal input on the WORD
SYNC IN connector, a 48 kHz WORD SYNC signal generated
within the control unit is output.
k MADI 1 OUT/IN connectors (BNC)
Connect a MADI signal from the Player PC to the IN connector
using a 75 Ω coaxial cable.
The OUT connector outputs the MADI signal that is input on
the MADI 1 IN or MADI 2 IN connector. Select which signal on
the input connectors to output using the DIP switches.
l MADI 2 OUT/IN connectors (SC)
Connect a MADI signal from the Player PC to the IN connector
using an optical fiber cable with SC connector.
The OUT connector outputs the MADI signal that is input on
the MADI 1 IN or MADI 2 IN connector. Select which signal on
the input connectors to output using the DIP switches.
m SPEAKERS 1 to 8 connectors (RJ-45)
Connect to RYZ-AS108 Multi-Channel Active Speakers to
output audio signals and power.
n Power supply connector
Connect to AC power supply.
Bekijk gratis de handleiding van Sony Sonic Surf VR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | Sonic Surf VR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2676 MB |
