Sony RCP-D50 handleiding
Handleiding
Je bekijkt pagina 24 van 62
24
Menu Configuration and Basic Menu Operations
OTHERS menu (with the DXC-D50 series)
Menu 2ndary menu Submenu Control item Function
Adjusting White Shading • R To adjust the V white shading (vertical variation of the white) of the
R signal
• G To adjust the V white shading of the G signal
• B To adjust the V white shading of the B signal
Camera Camera ID CAM ID IND To turn the camera ID display ON/OFF while the camera is in Color
Bars mode
Clock IND Switching of the clock indication
Cam: To always display the clock indication
Bars: To display only when the camera color bars are displayed
Off: No clock indication
• Char To select characters when entering a camera ID (alphanumerics,
symbols, and space)
• Cur To move the cursor when entering a camera ID (eight characters)
ID SET To register the entered camera ID
Center Marker Center Marker To turn the center marker ON/OFF
Safety Zone To set the safety zone (90%/80%/OFF)
Screen Mode
a)
Screen Mode To select the Screen mode (4:3/16:9)
Diag Req To request camera’s self-diagnostic data (available only when any
abnormality has been detected during self-diagnosis)
Reset To erase the camera’s self-diagnostic data
• Sel To display the data read from the camera in order (No display when
no abnormality has been detected during self-diagnosis)
Bars Bars Type To select the type of color-bar signals:
SMPTE(SPLIT)/SNG/FF 75%/FF 100%
File Scene Trans CAM->MS To transfer a scene file (from the camera to the Memory Stick)
MS->CAM To transfer a scene file (from the Memory Stick to the camera)
Copy to Slave To copy the status of the master unit to slave units
RCP Config RCP Buzzer • Call To set the volume of the call buzzer
Adjusting Volume • Touch To set the responding sound volume of the touch panel
• Switch To set the confirmation sound volume of the self-illuminating
switches
• Master To set the total buzzer sound volume
Call Buzzer To turn the call buzzer ON/OFF
Touch Click To turn the responding sound of the touch panel ON/OFF
SW Click To turn the confirmation sound of switches ON/OFF
All Off To turn the volume of all the buzzers ON/OFF
LED Bright • Switch To set the brightness of respective LEDs
• Tally
• Other
• Master To set the brightness of the all LEDs of the unit
RE Setting BLACK/FLARE To select the function for the BLACK/FLARE knob
Black: Black balance adjustment
Flare: Flare balance adjustment
VR Setting VR STD Mode To select the initial settings for IRIS or MASTER BLACK
adjustment mode: Absolute or Relative
VR Rel. Scale IRIS VR
To select the response rate of the IRIS knob (relative-value
adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest
response position)
Config
a) The item “Screen Mode” is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.
Bekijk gratis de handleiding van Sony RCP-D50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | RCP-D50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6874 MB |
