Sony NSR-50 handleiding
Handleiding
Je bekijkt pagina 22 van 200
Reconstructing Data Volume (Changing RAID Types) (Only the NSR-100/50)
22
3
Use the arrow keys on the keyboard to select [IDE
DiskOnModule], and press Enter.
Startup from DiskOnModule (DOM) begins.
After startup, the DOM menu appears.
4
Click the third item from the top, [Clean System
Restore with Changing RAID Types].
The RAID Type selection screen appears.
5
Select the RAID Type, and click [OK].
Example: For the NSR-50
The confirmation screen appears.
6
Click [OK].
RAID reconstruction for data volume and full
system restoration begins.
This process can take up to about 5 hours. A
progress bar appears during the process.
When the process successfully completes, a
notification screen appears.
Example: For an NSR-50 with RAID 1 selected
7
Press Enter after the process completes and the
message [Press any key to continue!] appears.
The screen returns to the DOM menu.
8
Click [Reboot].
The NSR reboots, and the Setup Wizard appears.
Boot Menu
1.QSI DVD+/-RW SDW-0826
2. WDC WD2500JD-22HBC0-(S1)
3. WDC WD2500JD-22HBC0-(S2)
4. PQI IDE DiskOnModule-(SM)
<Enter Setup>
Bekijk gratis de handleiding van Sony NSR-50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | NSR-50 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 41738 MB |
Caratteristiche Prodotto
| Gewicht | 12000 g |
| Stroomvoorziening | 100 - 127, 200 - 240 V AC |
| Framerate Motion JPEG | 240 fps |
| Aansluitingen | 2 x RGB\n2 x Mini jack\n2 x RCA-pin\n3 x RJ-45\n4 x USB\n1 x RS-232C (UPS) |
| Compatibele besturingssystemen | Linux |
