Sony MPES-3D01 handleiding
Handleiding
Je bekijkt pagina 25 van 138
25
Shutdown
Chapter 3 SIP GUI Software Startup and Shutdown
Shutdown
Quitting the SIP GUI Software
1
Perform one of the following.
• Access the [File] menu and select [Exit].
• Click the [×] button in the right of corner on the title bar of the “Stereo
Image Processor” window.
A confirmation message appears.
2
Perform one of the following.
If necessary, place check marks next to additional procedures to be
performed while quitting, and then click [Yes].
Save Setup Data: Save the current settings as a setup file. If a setup file
name has not been configured, the file will be saved automatically
under the name, “default_last_saved”.
For information on saving setup files, see “What Is a Setup File?”
(page 90).
Shutdown all the processors: Turn power to all connected MPE-200
units off.
The selected procedures are performed, and the SIP GUI software quits.
System Shutdown
By accessing the [File] menu and selecting “Shutdown the System,” you can
quit the SIP GUI software and turn off power to all connected MPE-200 units.
Unless forced shutdown is necessary, do not use the power button on the front
panel of the MPE-200 unit to shut down the system.
Note
Bekijk gratis de handleiding van Sony MPES-3D01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | MPES-3D01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15375 MB |
