Sony LMD-XH550N handleiding
Handleiding
Je bekijkt pagina 30 van 43
30
Screen Control menu
The Screen Control menu is used to set the image
display setting for each input.
PIP / POP menu
The PIP / POP menu is used to set the display
mode for the 2 or 3 screens display and for each
input.
RGB Range Select the RGB signal range from
“Auto,” “Limited,” or “Full.” If you set to
“Auto,” this item is set to “Limited”
when inputting video signals, and
“Full” when inputting PC signals.
Color Space Select the color gamut from “Auto,”
“B
T.709,” or “BT.2020.”
“Auto” is available only for the 12G-SDI
input
connector, 3G-SDI input
connector, and HDMI input connector.
Menu Setting
4K Scan Size Select the scan size for the display of
the 4K
equivalent signal from “Off,”
“Mode7,” or “Mode8.”
HD Scan Size Select the scan size for the HD signal
d
isplay from “Off,” “Mode2” to
”Mode6.”
SD Scan Size Select the scan size for the SD signal
display f
rom “Off,” or “Mode1.”
4K Zoom Select the display magnification of
vide
o signals from “Off,” “x1.2,” “x1.5,”
or “x2.0.”
Notes
Zoom is available only for the 4K
equivalent signal.
When displaying 2 or 3 screen
display, zoom is available only in
the main screen of PIP view.
“4K Scan Size” is not available while
displaying with 4K Zoom.
Flip Pattern Select the pattern which flips and
dis
plays the image from “Off” or
“Rotation.”
SD Aspect Select the aspect ratio of the SD signal
d
isplay from “4:3,” or “16:9.”
Image Division Set the image division of the SDI 4K
equi
valent signal.
Select “2SI” to receive images of the 2
sa
mple Interleave system. Select
“Square” to receive images of the
Square system.
HDMI Signal Format Select the HDMI signal format from
“St
andard Format,” or “Enhanced
Format.”
Standard Format:
Select to use for a standard HDMI
fo
rmat signal.
Enhanced Format:
Select to use for a high-resolution
HD
MI format signal
1)
or HDR-
compatible HDMI format signal.
Menu Setting
1) Signals in resolutions of 3840 ×
2160 or 4096 × 2160 are listed
below:
4:4:4 RGB/YCbCr-50P/60P-8bit
s
ignals
4:2:2 YCbCr-50P/60P-12bit
s
ignals
4:4:4 RGB/YCbCr-25P/30P-10bit
s
ignals
Notes
Images may not be output correctly
with “Enhanced Format.” In that
case, select “Standard Format.”
To display the corresponding signal
with “Enhanced Format,” use a
Premium High-Speed HDMI cable
within a length of 3 meters.
Menu Setting
3 Screen Display
Port C Display Sets the display of the sub screen for
t
he third screen.
Select “On” or “Off.”
Port C Input Sets the input connector for the third
sc
reen.
Select from among “12G-SDI 1,” “12G-
SD
I 2,” “3G-SDI,” “Display Port,”
“HDMI,” “DVI-D.”
Note
When inputting the 4K equivalent
signal to the main or sub screen, the
screen is not displayed even though
the 4K equivalent signal is input to the
third screen.
Clipping Size The clipping size can be set when
using 2 or 3 screen-display.
HD signal:
Select from “Normal,” “4:3,” “5:4,”
or “V F
ull.”
4K equivalent signal:
Select from “Normal” or “V Full.”
Note
“V Full” is applied to the main/sub
screen of POP1 for 2 screen-display
and to the main screen of POP1 for 3
screen-display.
Sub Screen Position
PIP Sets the sub screen position for the 2
o
r 3 screens display (PIP).
Menu Setting
Bekijk gratis de handleiding van Sony LMD-XH550N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | LMD-XH550N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4044 MB |
