Sony ICP-3016 handleiding
Handleiding
Je bekijkt pagina 19 van 59
19
Configuring the Network
Preparation
Configuring the Network
When power is turned on, all devices connected to the
MVS system LAN are detected and corresponding settings
are registered.
1
Display the menu.
a Open the Engineering Setup >System >Network
Config menu (7311).
2
Set the group ID.
Network Config menu
a Check the group ID.
In this example, check that the group ID is set to
“1”.
If the group ID is not set to “1”, press [Group ID]
and change the setting.
For details about settings, refer to the User’s
Guide.
3
Detect the connected devices.
a Press [Auto Config].
b Check the message, then press [Yes].
A list of detected devices appears.
4
Register the list of detected devices.
a Press [Define].
b Check the message, then press [Yes].
The list is registered as the network settings when
power is turned on.
Group ID
Auto Config Define
MVS-6520/6530/3000A screen shown.
On the MVS-3000, [DME1] is not displayed.
DME
Control panel
Switcher processor
Bekijk gratis de handleiding van Sony ICP-3016, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | ICP-3016 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12851 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 12000 g |
| Breedte | 666 mm |
| Diepte | 396 mm |
| Hoogte | 120 mm |
