Sony HVR-MRC1K handleiding

33 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 11 van 33
11
Recording images from the camcorder to this unit
x Recording video simultaneously on this unit and
a camcorder
Connecting to a camcorder with an “external REC
control” function (SYNCHRO mode)
When connected to a camcorder that has an external REC
control function, this unit can be controlled by the
camcorder to record video data simultaneously to the
camcorder recording on tape.
Clips recorded by this unit include several frames after
the recording stopping point on the tape.
1 Press the CAM LINK button of this unit and set it to
ON.
2 Set the [CAMLINK SEL] setting of the [SETTING] menu
in this unit to [SYNCHRO].
3 Set the [EXT REC CTRL] setting of the [IN OUT REC]
menu in the camcorder to [SYNCHRONOUS].
4 Connect the camcorder to this unit.
5 Press the REC START/STOP button of the camcorder to
start recording.
The above Step 3 is for HVR-Z7/Z5/Z1/V1/S270
camcorders. For details on another camcorder you want to
connect to this unit, refer to the operating instructions
supplied with that camcorder.
For details on the types of camcorder that have an “external
REC control” function and on motion detection, refer to the
“Guide to supported models and their functions” supplied
with this unit.
Connecting to a camcorder without an “external
REC control” function (FOLLOW mode)
When connected to a camcorder that has no external REC
control function, this unit regularly checks the status of
the camcorder and follows its recording operation.
1 Press the CAM LINK button of this unit and set it to
ON.
2 Set the [CAMLINK SEL] setting of the [SETTING] menu
in this unit to [FOLLOW].
3 Connect the camcorder to this unit.
4 Press the REC START/STOP button of the camcorder to
start recording.
Notes
There may be several seconds of delay behind the tape
recording/stopping point of the camcorder.
For details on camcorders that have been tested in
FOLLOW mode, refer to “Guide to supported models
and their functions” supplied with this unit.
Camcorder
STANDBY REC STANDBY
This unit
STANDBY REC STANDBY
REC
Camcorder
STOP
STANDBY REC STANDBY
This unit
STANDBY REC STANDBY
Images recorded by the camcorder can be recorded onto this
unit.
Recording images
(POWER switch at the ON side)
The different methods of recording are as follows:
x Recording video simultaneously on this unit and
a camcorder
x Recording on this unit during camcorder tape
replacement
x Recording video from this unit
x Operating cache recording
x Operating interval recording
x Operating loop recording
Notes
•A 0 KB file may be created, but the file cannot be opened
because it does not have video data. Do not delete the 0 KB
file on your computer. If you do, this clip cannot be played
back.
When changing the tape, the audio may mute on some
camcorder models. At the recorded part, only video is
recorded.
When HDV recording with this unit, if you start the tape
recording with the camcorder, the i.LINK output stream is
cut for about 0.5 seconds, so when that video is recorded
onto this unit, it is the cut form. In this case, the file will be
separated before and after changing the tape recording
started.
The file will be separated automatically every time the
recording time of one clip over about 20 minutes but this
clip is operated as a same clip.
If the i.LINK cable is disconnected or the power of the
connecting device turned off during recording, recording
stops but the data recorded until that point is recorded.
If the power of this unit is turned off by battery exhaustion
or mistakenly sliding the POWER switch, the data recorded
until the power off is detected is recorded on a
CompactFlash in this unit.
If the battery pack is removed or the jack of the AC adaptor
disconnected during recording, the data at the moment the
power goes off may not be written correctly.
The interval recording/smooth slow recording/DV frame
recording operation of the camcorder are not timed, so
operations are not guaranteed.
Do not switch the audio mode of the camcorder while
recording. Depending on the PC application, there may not
be any audio.

Bekijk gratis de handleiding van Sony HVR-MRC1K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkSony
ModelHVR-MRC1K
CategorieNiet gecategoriseerd
TaalNederlands
Grootte3416 MB

Caratteristiche Prodotto

Kleur van het productZwart
Gewicht130 g
BeeldschermLCD
Resolutie128 x 64 Pixels
Compatibele geheugenkaartenCF