Sony HKCU1003 handleiding
Handleiding
Je bekijkt pagina 58 van 66
58
Internal Switches and Internal Boards
AVP Board
a CCU POWER indicator
Lights when the power voltage inside the board is normal.
b CAM LOCK (camera lock) indicator
Lights when the transaction with the video camera is
operating normally.
c CAM POWER (camera power) switch
Press downward to turn the video camera connected to this
unit on or off.
d SYSTEM indicators
/1.001 (frame frequency): Lights when the frame
frequency of the camera system is set to 1/1.001.
LINE DELAY (phase difference): Lights when the phase
difference between HD and SD outputs is set to LINE
DELAY.
Phase difference is 90H when the scan line is 1125, or
120H when the scan line is 750.
e 2WIRE CANCEL controls
When using a 2-wire intercom system, adjust the controls
to minimize the side tone level on the producer line
(PROD) and engineer line (ENG).
DTX Board
a OPTICAL CONDITION indicators
The corresponding LEDs light to show the condition of
optical signal reception at this unit (CCU) and the camera
(CAM):
Green: Good
Yellow: Low optical level
Red: Extremely low optical level, or disconnection
If communication with the connected camera is not
established, all three CAM indicators (green, yellow and
red) go dark.
b Menu control switch
Displays the setting status of this unit or the setup menu on
the monitor connected to this unit.
DISP: Displays the setting status of this unit.
OFF: Doesnft display the setting status or the setup menu.
MENU: Displays the setup menu.
c CANCEL/ENTER switch
Used for operations on the setup menu. Press towards
ENTER to select an item or to enter a setting, or towards
CANCEL to cancel the setting.
d +/– switch
Used to adjust the setting items on the setup menu.
AVP
/1.001
LINE
DELAY
CCU
POWER
CAM
LOCK
CAM POWER
SYSTEM
ON/
OFF
PROD
ENG
2WIRE CANCEL
1 CCU POWER indicator
2 CAM LOCK indicator
5 2WIRE CANCEL controls
4 SYSTEM indicators
3 CAM POWER switch
DTX
CHARACTER
DISP
CCU
CAM
OFF
MENU
CANCEL
ENTER
3 CANCEL/ENTER switch
4 +/– switch
2 Menu control switch
1 OPTICAL CONDITION indicators
Bekijk gratis de handleiding van Sony HKCU1003, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | HKCU1003 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12915 MB |
