Sony HDC-4300 handleiding
Handleiding
Je bekijkt pagina 18 van 71
18
4 Adjust the front-rear position so that the camera
handle does not interfere when you rotate the
BKW-401 arm upwards.
Attaching the Cable Clamp Belt
(Supplied)
You can secure the optical/electrical multi cable, connected to
the BPU connector, to the side of the camera by attaching the
supplied cable clamp belt.
1 Insert the belt bracket into hole A or B of the cable
clamp belt.
2 Remove two +B3×5 screws and a hidden screw
shown in the figure below from the camera.
3 Secure the cable clamp belt to the camera, using the
two supplied +B3×8 screws.
4 1 Release the buckle, 2 bundle the cable with the
belt,
3 then lock the buckle again.
5 Adjust the length by pulling down the end of the belt.
D
Not interfering with handle
A
B
Belt bracket
Screws (+B3×5)
Hidden screw
Screws (+B3×8)
1
2
3
Optical/electrical
multi cable
Bekijk gratis de handleiding van Sony HDC-4300, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | HDC-4300 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8647 MB |
