Handleiding
Je bekijkt pagina 62 van 64
8
EN
Safety and Regulatory Booklet
5-018-116-16(1)
☐ Keep the power cord away from heat
sources.
A LCD Display with a three-wire grounding
type AC power cord plug must be connected to
an AC power outlet with a protective earthing
connection (only applicable for Class I
product).
☐ Do not convert or damage the AC power
cord.
☐ Consult your electrician to have the outlet
changed to suit your LCD Display.
Subjecting the AC power cord to wear and/or
abuse can damage the AC power cord and
your LCD Display.
☐ Do not place the LCD Display where the
power cord can be easily pinched, bent,
twisted, or catch your feet.
☐ Do not allow anything to rest on or roll over
the cord.
☐ Before connecting cables, be sure to unplug
the AC power cord for your safety.
☐ Do not move the LCD Display with the AC
power cord (or other cables such as audio
and video) connected.
☐ Use only an original Sony AC power cord
with your LCD Display; no brand
substitution is allowed.
☐ Do not use AC power cord supplied with
the LCD Display with any other equipment.
☐ Never use a damaged AC power
cord. A damaged AC power
cord can cause a short-circuit,
which may result in a fire or
electric shock.
Do not use a damaged or poorly
fitting AC power outlet as your
LCD Display’s power source.
☐ Insert the plug fully into the
outlet. If it is loose, it may cause
arcing and result in a fire.
☐ Do not overload the same AC
power outlet.
Unplugging the AC power cord from the wall
outlet will completely remove power from the
LCD Display.
☐ As the LCD Display is not disconnected
from the AC power cord when the LCD
Display is just turned off, pull the plug from
the AC power outlet to disconnect the LCD
Display completely.
Clean the AC power plug
Unplug the AC power plug
and clean it occasionally to
avoid dust from accumulating.
While cleaning, look for signs
of damage. A damaged AC power cord should
never be used.
ACCESSORIES
Keep small accessories out of children’s reach.
Use only the specified accessories with this
LCD Display.
Volume Adjustment
☐ When using headphones,
adjust the volume to avoid
excessive audio levels from
causing possible hearing loss.
SCREEN (For LCD Display only):
☐ Although the LCD screen is made with
high-precision technology and has effective
pixels of 99.99% or more, black dots or
bright points of light (red, blue, or green)
may appear constantly on the LCD screen.
This is a structural property of the LCD
panel and is not a malfunction.
☐ The LCD screen is made with high-
precision technology and to achieve a high
level of performance and picture quality,
this LCD Display’s backlight setting is set to
maximize the brightness of the LCD
Display. However, uneven brightness may
be observed when the LCD Display is
viewed in a dark ambient without an input
source or with a blank screen. This
condition is normal and not a malfunction
of the LCD Display. Changing the Picture
mode, Backlight setting, enabling the Light
Sensor (if applicable), or turning on the
Power Management will improve this
condition.
☐ To avoid damaging the LCD panel, do not
expose the LCD screen to direct sunlight.
Bekijk gratis de handleiding van Sony FW-55BZ30L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | FW-55BZ30L |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 7997 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht verpakking | 23000 g |
| Breedte verpakking | 1362 mm |
| Diepte verpakking | 160 mm |
| Hoogte verpakking | 840 mm |
