Sony DWX Wireless Studio handleiding
Handleiding
Je bekijkt pagina 24 van 89
24
• Positions of meter icons registered in the status viewer.
• Omit IP address list settings
• List of settings in [IP address range settings] in [Network
interface settings]
Saving the settings as files
1
Remove the check mark next to [Online monitoring
and control] in the [Device] menu.
The system enters offline mode.
2
Select [File] menu > [Save as].
The current configurations are saved as a settings file.
When saving transmitter settings, make sure that the
transmitters are active and that signals are received
properly. If the information is not received properly from
a transmitter, the factory default settings of that transmitter
will be saved.
Opening files and editing settings
1
Remove the check mark next to [Online monitoring
and control] in the [Device] menu.
The system enters offline mode.
2
Select [File] menu > [Open].
3
Select the previously saved file, and click [OK].
The information stored in the file is displayed on the
Wireless Studio screen.
4
Edit the setting values.
Settings values can be edited in the [Property] window
or the [Property List] tab of the sub window.
For details on changing the settings, see “[Property
List] Tab” (page 39) and “[Property] Window”
(page 55).
When you are finished editing, save the settings to a file if
necessary.
You can change the [Receiver Model] and [Transmitter
Type] settings when editing settings in offline mode.
However, if you specify a setting that differs from the
actual setting of the device, an inconsistency will occur
when you apply the setting using the [Load settings]
function. The cells for these [Receiver Model] and
[Transmitter Type] settings will be displayed in yellow.
Make sure to use the actual model name and type of the
device when changing the [Receiver Model] and
[Transmitter Type] settings.
Opening files and applying settings
1
Remove the check mark next to [Online monitoring
and control] in the [Device] menu.
The system enters offline mode.
2
Select [File] menu > [Open].
3
Select the previously saved file, and click [OK].
The information stored in the file is displayed on the
Wireless Studio screen.
Edit the settings here if necessary.
4
Select [All Receiver’s settings], [All Receiver’s and
All Transmitter’s settings], or [Select Receiver’s and
Transmitter’s settings] from [Device] menu > [Load
settings].
The settings are applied to the devices. The devices to
which the settings are applied will depend on the
option you selected.
If [All Receiver’s settings] is selected
The settings are applied to all the receivers that appear
in the device list.
If [All Receiver’s and All Transmitter’s
settings] is selected
The settings are applied to all the receivers that appear
in the device list and their paired transmitters.
If [Select Receiver’s and Transmitter’s
settings] is selected
The [Load settings] window. The settings are applied
to the digital wireless receivers and transmitters
selected in the [Load settings] window.
Note
Note
Bekijk gratis de handleiding van Sony DWX Wireless Studio, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | DWX Wireless Studio |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20587 MB |
