Sony AIBO ERS-7M3 handleiding
Handleiding
Je bekijkt pagina 12 van 63
Network Configuration
12
When using a DHCP server in your network environment
Configure settings on the “Easy” tab.
When using a DHCP server, changes to the “Advanced” tab (page 13) are unnecessary.
1 Click the “Browse” button, and specify the drive where the AIBO MIND 3
software “Memory Stick™” media is set (e.g. “E:” drive).
2 The name that you enter here will appear as the “AIBO Name” on the “AIBO
Search” tab (page 14). This name can be up to 8 alphanumeric characters and
must contain at least one letter.
3 Enter the network name (SSID) used by the wireless LAN access point.
(Maximum of 32 characters. Only alphanumeric characters and symbols are
allowed.)
4 Configure if using WEP (page 62). (If not using WEP, no settings are
necessary.) If using WEP, select the “Enable WEP Encryption” check box, and
enter the passkey (WEP)* for the wireless LAN access point. (Passkeys must
consist of alphanumeric characters or symbols. For [ASCII], the passkey must
be 5 or 13 characters. For [HEX], it must be 10 or 26 characters.)
Set the network authorization to “Open System”.
Example Configuration
5 Confirm your settings, and click this button.
* To insure security, the encrypted passkey (WEP) is displayed with 13
asterisks (*) for ASCII and 26 for HEX, regardless of the number of characters
entered.
Alphanumeric Hexadecimal
WEP64 (40 bit) AIBO2 4149424f32
WEP128 (104 bit) ENTERTAINMENT 454e5445525441494e74d454e54
Bekijk gratis de handleiding van Sony AIBO ERS-7M3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | AIBO ERS-7M3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6726 MB |
