Sonnenkonig GLASKON 1000 handleiding
Handleiding
Je bekijkt pagina 42 van 60
EN
42
07 - OPERATION
Activate display
Press the ON/OFF button on the control panel. The heater goes into anti-freeze mode, the LCD screen
shows 7.0°C and .
Select mode
When the heater is in operating mode, press the „MODE“ button to select different operating modes. There are 6
operating modes:
Comfort mode: The user can set the comfort temperature by pressing „+“ and „-“ on the keypad; after
selecting the temperature for your comfort mode, stop pressing and wait for 5 seconds, the „°C“ on the
screen will flash 5 times, the temperature is set. Press „+“ or „-“ for more than 1 second to set the tem-
perature quickly. The temperature range is 5°C ~ 35°C.
Comfort mode minus 1°C: The user cannot adjust the temperature. The heater lowers the temperature by
1°C from the comfort temperature set in comfort mode. For example, if you set 19°C as the comfort
temperature, the temperature in comfort mode minus 1°C, is 18°C.
Comfort mode minus 2°C: The user cannot set the temperature. The heater lowers the temperature by 2°C
from the comfort temperature set in comfort mode. For example, if you have set 19°C as the comfort
temperature, the temperature in comfort mode minus 2°C is 17°C.
ECO mode: The user cannot adjust the temperature. The heater lowers the temperature by 3.5°C from
the comfort temperature set in comfort mode. For example, if you have set 19°C as the comfort tempe-
rature, the temperature in ECO mode is - 3.5°C, i.e. 15.5°C.
Anti-Frost Mode: The temperature is 7°C, user cannot adjust the temperature.
Programme mode: User can set the working mode in the current time and in the future for one week.
Open window: If the heater detects that the room temperature drops by 4°C within 30 minutes, the heater
works in anti-frost mode.
Keypad Lock Function: The keypad can be locked to prevent tampering by pressing and holding down the
„Mode“ and „P“ keys for 3 secongd. This function can be reversed by repeating the above process.
Commissioning
To insert the heater, proceed as follows:
- Plug the mains cable into the power circuit.
- Press the button on the unit to „I“. After 3 flashes, the standby mode starts.
- Then operate the unit according to the following description.
Preinstalled programme
P1 From 0 to 6: Eco mode
From 6 to 9: Comfort mode
From 9 to 17: Eco mode
From 17 to 23: Comfort mode
From 23 to 6: Eco mode
P2 From 0 to 6: Eco mode
From 6 to 9: Comfort mode
From 9 to 12: Eco mode
From 12 to 13:30: Comfort mode
From 13:30 to 17: Eco mode
From 17 to 23: Comfort mode
From 23 to 6: Eco mode
Bekijk gratis de handleiding van Sonnenkonig GLASKON 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonnenkonig |
| Model | GLASKON 1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5130 MB |
