Sonnenkonig BKT 1 handleiding
Handleiding
Je bekijkt pagina 47 van 49
Separable Terma-SPLIT heating element
Interface for cooperation with FIL-Pilote
Room temperature regulation
Steering of medium heat output
* possibility to configure heat output regulation mode
BOOSTER function (device turns off after a certain time)
DRYER function
on termination of dryer function )
(device goes back to the previous setting
24-HR TIMER
* with IR external programmer
Saving of settings on electricity failure (possibility to
cooperate with an external timer)
Actual working time meter
IR interface for communication with remote programmer
Current and set temperature indicator
Membrane keyboard
Display
Heating element type
ANTI-FREEZE function (Anti-Freeze protection)
Casing protection rating
Malfunction signalisation
BKT 1 BKT 4
FP4 FP6
2-step heat output
regulation
9-step temperature
regulation
96 zones *
diode indicator
1-digit LED
PTC,
Class II
PTC,
Class II
IPx4
IPx5
DEVICE CHARACTERISTICS
Warranty Terms & Conditions
1. The subject of this warranty is a device using Terma-Split system. Product
name and characteristics are specified on the packaging.
2. By accepting the device on purchase, the Client confirms that the product is of
full value. The Client should immediately inform the Seller of any discovered
faults – otherwise it will be understood that the Product was faultless at the
time of purchase. This refers especially to any faults or damages to the
controller casing.
3. Warranty period for the Product is 24 months from the date of purchase, but no
longer than 36 months from date of production.
4. Any claims made will be processed on production of the warranty card and
evidence of purchase. Manufacturer has the right to reject any claim on the
grounds of not presenting of any of the above documents.
5. This warranty does not comprise any faults that are due to:
– incorrect (not in accordance with the manual) installation, use or
disassembly,
– incorrect use of the heating element,
– Product being handled by unauthorized persons,
– any faults or damages caused by the Client after having purchased and
accepted the Product.
6. Central heating installation should be fitted with lock-shield valves, enabling
disassembly of the radiator or the heating element and its control head without
the necessity of emptying the whole system of the heating medium. Any
problems or expenses arising from lack of such valves in the installation cannot
be used as the grounds for any claims against Terma.
7. The attached Product Manual is an integral element of the Warranty. Please
read it carefully prior to the Product installation and use.
8. The Manufacturer is obliged to remove any production fault within 14 working
days from receipt of the faulty device to Manufacturer's premises.
9. Should the repair turn out impossible, Manufacturer is obliged to replace the
faulty Product with a new, full-value unit of identical parameters.
Bekijk gratis de handleiding van Sonnenkonig BKT 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonnenkonig |
| Model | BKT 1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4215 MB |
