Sonifex PS-PLAY handleiding

Niet gecategoriseerd

Sonifex

44 pagina's

PDF beschikbaar

Handleiding

2 PS-SEND Audio to IP Streaming Encoder

Rear Panel Connections and Operation

All the audio connectors together with the ethernet, serial and GPI/O connectors are found on the rear panel of the unit. All the audio connections are

inputs on this unit.

AES/EBU Balanced

Digital Input

The stereo digital input XLR 3 pin

socket has an impedance of 110Ω and

the following connections:

Pin 1: Screen

Pin 2: Phase

Pin 3: Non-phase

The signals on this connector should

meet the IEC 60968 specification

S/PDIF Unbalanced

Digital Input

The stereo S/PDIF input is an RCA

phono connector and is typically used

for consumer digital audio. The S/PDIF

inputs have an impedance of 75Ω.

Pin: Signal

Ring: Screen

Balanced Analogue Inputs

The two XLR 3 pin sockets used for

the left and right channel inputs are

electronically balanced and have an

impedance of >10kΩ bridging. Each XLR

has the following

connections:

Pin 1: Screen.

Pin 2: Phase.

Pin 3: Non-phase.

Unbalanced Analogue Inputs

The two left and right RCA inputs are

unbalanced and have an impedance of

>20kΩ. They are connected as follows:

Pin: Signal

Ring: Screen

Fig 2-6: PS-SEND XLR Analogue Inputs

Fig 2-7: PS-SEND RCA Phono Analogue

Inputs

Fig 2-8 PS-SEND AES/EBU Input

Fig 2-9: PS-SEND S/PDIF Input

Fig 2-5: PS-SEND Rear Panel

Bekijk gratis de handleiding van Sonifex PS-PLAY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.