Sonifex PS-PLAY handleiding
Handleiding
Je bekijkt pagina 10 van 44
2
2 PS-SEND Audio to IP Streaming Encoder
2. PS-SEND Audio to IP Streaming Encoder
Introduction
SONICIP technology, if selected. Remote level monitoring is also possible
using SNMP traps.
Two red and green front panel LEDs indicate what state the unit is currently
in, be it normal operational mode or bootstrap mode, and also indicates
the current network connection status. A blue LED denotes power to the
unit. The input being routed to the IP stream can be monitored on the front
panel ¼” (6.35mm) stereo jack socket in combination with a headphone
volume knob.
The rear panel has 2 x RJ45 connectors, one for the 10/100Mbit Ethernet
interface and one for GPI connections. The PS-SEND has 6 x GPIs which can
be used to trigger the sending of the audio stream and which can also be
used to trigger remote events using an output relay on the PS-PLAY and
PS-AMP. There is a 9 way D-type RS232 serial connection for control of the
unit by automation systems and firmware updates. The unit can be remote
controlled via serial connection, TCP or UDP.
Power to the unit is via a universal supply 85V - 264V fused IEC mains
socket.
The PS-SEND is a freestanding audio to IP converter which is also available
in a 1U rack-mount as the PS-SENDS. It receives audio from a number of
user selectable external stereo sources including balanced and unbalanced
analogue audio, AES/EBU, S/PDIF & TOSlink digital audio. Once an audio
source is selected, the unit encodes the audio in real time and sends it to
the network as an encoded stream. The audio stream can be distributed
over an IP-based network to one or more PS-PLAY or PS-AMP units or other
proprietary servers such as those for Icecast or Shoutcast.
All the configuration settings for the unit are accessed via a local web-
server built into it. The type of encoding and the transport mechanism
are defined by selecting the connection from a pre-defined list. The
PS-SEND encodes an audio source into an MP3 (from analogue or digital
inputs), G.711 or PCM (from analogue inputs only) audio stream using
HTTP, RTP, raw UDP or raw TCP protocols, including multicast support and
the following encoder types are available: Mpeg1 & 2 Layer3, PM3 VBR
(variable bit-rate), PCM linear and A-law, U-law, with 8kHz-48kHz sample
rates . The unit can configure its own IP address using DHCP/BOOTP, IPzator
or AutoIP. A readout of the set IP address can be heard on every reset using
Fig 2-1: PS-SEND Front Panel
Bekijk gratis de handleiding van Sonifex PS-PLAY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonifex |
| Model | PS-PLAY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8581 MB |
