Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 29 van 48
Editing bass patch memory parameters
29
Setting the unison width
① Turn the DIMENSION knobs for OSC 1 and OSC 2.
• The parameter is shown on the display.
• The adjustment range is 0–127.
Setting the noise type
① Press , and select page 2.
The PAGE LED will light.
② Press
.
The type LED will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the type.
• The parameter is shown on the display.
• Both the encoder-type and volume-type
VALUE
knobs can be used.
• 16 types can be chosen.
1. White noise（WHT on display）
2. Pink noise（PNK on display）
3. Brown noise（BRWN on display）
4. Atonal noise 1（ATN.1 on display）
5. Atonal noise 2（ATN.2 on display）
6. Atonal noise 3（ATN.3 on display）
7. Atonal noise 4（ATN.4 on display）
8. Atonal noise 5（ATN.5 on display）
9. Atonal noise 6（ATN.6 on display）
10. Atonal noise 7（ATN.7 on display）
11. Atonal noise 8（ATN.8 on display）
12. Atonal noise 9（ATN.9 on display）
13. Vinyl（VNYL on display）
14. Water 1（WTR.1 on display）
15. Water 2（WTR.2 on display）
16. Water 3（WTR.3 on display）
Setting noise levels
① Press , and select PAGE 1.
The PAGE LED will become unlit.
② Press
.
The LEVEL LED will light.
Setting oscillator unison detuning
① Press the button for the oscillator that will have uni-
son detuning adjusted.
② Press
, and select page 2.
The PAGE LED will light.
③ Press
.
The unison detune LED will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the unison detuning.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• This changes detuning in a range of 0–100%.
• Both the encoder-type and volume-type
VALUE
knobs can be used.
• This cannot be set for SUB.
Setting oscillator unison blend amounts
① Press the button for the oscillator that will have uni-
son blend amount adjusted.
② Press
, and select page 2.
The PAGE LED will light.
③ Press
.
The unison blend LED will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the blend amount.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• The blend amount can be set to 0–100%.
• Both the encoder-type and volume-type
VALUE
knobs can be used.
• This cannot be set for SUB.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
