Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 20 van 48
Sequencer
20
This section explains how to input sequences and make
settings for them.
Bass step recording
① Select the bass track.
② Press
(lights red).
Step LEDs light for step with input notes.
③ Use
and to select the page. (The selected
page button will light red.)
• The pattern lengths correspond to page buttons as
follows.
1–16:
lit green
17–32:
lit green
33–48:
lit orange
49–64:
lit orange
• Page buttons are enabled or disabled according to
the length of the pattern.
④ Press the step button for the position to input.
The input note sounds, and the step LED blinks.
• The VALUE knob can also be turned to change
the step position. (Step notes will sound during
movement).
⑤ Play a note on the keyboard.
The note of the key pressed sounds (continuously
with sustain).
• Playing the same note that has already been input
on the step will clear it.
• By pressing a different step button while continu
-
ing to hold a keyboard key, notes can be input on
all the steps in between. (Changing pages is also
possible.) If tie is enabled, a tied note will be input
between the steps. (If the same note already exists
on a step of the tied note, it will be overwritten.)
• While pressing and holding
, press a step but-
ton to delete note and parameter lock data for that
step. (If that step includes a tied note, the entire
tied note will be deleted. It will not be divided.)
• When AUTO STEP is ON, after all keyboard keys are
released, the sequencer will advance to the next
step, and the note on that step will sound.
• When SOUND LOCK is active, playing keyboard
keys will overwrite notes on steps. (See "Locking
played bass sounds to steps (sound locking)" on
p.23)
• Notes cannot be tied from the last page to the rst
page.
• During tied note input, if a step in a position earlier
than the current step is pressed, it will be reversed.
• The
button can be used even when not record-
ing.
Drum step recording
(select mode)
① Select the drum track and enable select mode.
② Press a pad key.
• The instrument name appears on the display
• While pressing
, press a pad key to play its
sound (one shot).
③ Press
(lights red).
Step LEDs light for step with input notes.
④ Use
and to select the page. (The selected
page button will light red.)
• The pattern lengths correspond to page buttons as
follows.
1–16:
lit green
17–32:
lit green
33–48:
lit orange
49–64:
lit orange
• Page buttons are enabled or disabled according to
the length of the pattern.
⑤ Press the step button for the position to input.
The step LED lights.
• While pressing and holding
, press a step button
to delete the note and parameter lock data for the
current instrument.
• If a note has already been inputted in the step, it
will be cleared.
• Auto step is not enabled.
• If the sound lock function is enabled, parameter
data will also be saved.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
