Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 10 van 48
Bass track settings
10
This section explains bass track sound settings.
Selecting the bass track
① Press .
The first 16 steps of the bass track sequence are
shown by the step LEDs.
• The parameters shown in the pink areas on the top
of the unit are for controlling the bass track.
Changing the bass octave range
① Press / to raise/lower the range by one octave.
• The range can be raised or lowered by up to 3 oc-
taves from the standard octave.
• Depending on the octave, the
/ button color
changes from green ( ± 1) to orange ( ± 2) to red
( ± 3). (They are unlit when the octave has not been
changed.)
• The default octave range is –2.
Changing the bass patch memory
① While pressing , turn the bank knob to select
the bank.
• The bank number is shown on the display.
• There are 8 banks.
② Turn the
MEMORY knob to select the patch mem-
ory.
• The patch name is shown on the display.
• See the preset patch memory list for details about
the preset patch memories.
Adjusting assigned parameters
① Turn the ASSIGN 1 or ASSIGN 2 knob.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• See "Assigning modulator outputs to parameters"
on p.33 for details about parameter assignment.
Adjusting the machine gun eect
① Turn the M.GUN knob.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• Settings 0–31 are at a quarter-note BPM rate with
depth from 0–100%. The note lengths become
shorter as the setting increases from 32.
Adjusting the pitch LFO speed
① Turn the RATE knob.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• The frequency can be changed in a range of 0.1–30
Hz.
Adjusting the amount of the pitch LFO
eect
① Turn the PITCH knob.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• This changes it in a range of ± 1 octaves.
Sweeping notes while playing
① While pressing , press (sweep down) or
(sweep up).
• Press it again to end ( and become unlit).
Setting the sweep amount
① While pressing , turn the
sweep range knob to
set the sweep amount.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
