Sommer RDC Vision+ handleiding
Handleiding
Je bekijkt pagina 6 van 50
6
1. About this Installation and Operating Manual
1.8 Intended use
The roller door control unit RDC Vision
+
may only be used:
• to control motors in roller doors (max.: 1000 W).
• if the system is in perfect technical condition.
• in accordance with the safety instructions and
warnings provided in this Installation and Operating
Manual.
1.9 Improper use
The roller door control unit RDC Vision
+
may not
be used
in conjunction with motors in roller grille doors.
Any use above and beyond that described in Chapter
"Intended use" on page 6constitutes improper use.
The user bears the sole responsibility for any risk involved.
The manufacturer's warranty will be voided by:
• damage caused by other use and improper use
• use with defective parts
• unauthorised modications to the product
• modications and non-approved programming of the
product and its components
The product must not be used in:
• areas with explosion hazard
• very salty air
• aggressive atmosphere, including chlorine
1.10 Qualifications of personnel
Qualied specialist for installation,
commissioning and disassembly
This Installation and Operating Manual must be read,
understood and complied with by a qualified specialist who
installs or performs maintenance on the control unit.
Work on the electrical system and live parts may be per-
formed only by a trained electrician in accordance with
EN 50110-1.
The installation, initial operation and disassembly of the
control unit may only be performed by a qualified specialist.
The qualified specialist must be familiar with the following
standards:
• EN 13241 Doors and gates – Product standard
• EN 12604 Doors and gates – Mechanical aspects –
Requirements
• EN 12453 – Safety in use of power-operated gates
A qualified specialist is a person commissioned by the
installer. The qualified specialist must instruct the user:
• on the operation of the control unit and its dangers
• on the handling of the manual emergency release (if
installed)
• on regular maintenance, testing and care which the
user can carry out
The user must be informed that other users must be
instructed on the operation of the control unit and its
dangers.
The user must be informed about which work may only be
performed by a qualified specialist:
• installation of accessories
• settings
• regular maintenance, testing and care
• troubleshooting and repairs
• The following documents for the door system must be
handed over to the user:
• EC Declaration of Conformity
• handover protocol and inspection book
• the installation and operating manuals for the operator
and the door
Bekijk gratis de handleiding van Sommer RDC Vision+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sommer |
| Model | RDC Vision+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5752 MB |
