Sommer RDC Vision+ handleiding
Handleiding
Je bekijkt pagina 4 van 50
4
1. About this Installation and Operating Manual
1.1 Storage and circulation of the
Installation and Operating Manual
Read this Installation and Operating Manual carefully and
completely before installation, commissioning and oper-
ation and also before removal. Follow all warnings and
safety instructions.
Keep this Installation and Operating Manual accessible at
all times at the place of use.
A replacement for the installation and operating manual
can be downloaded from SOMMER Antriebs- und Funk-
technik GmbH at:
www.sommer.eu
During the transfer or resale of the product to third parties,
the following documents must be passed on to the new
operator:
• this Installation and Operating Manual
• documents recording retrotting and repairs
• proof of regular care, maintenance and testing
• Declaration of Conformity and Handover Report
1.2 Important for translations
This original Installation and Operating Manual was written
in German. The other available languages are translations
of the German version.
You can get the original Installation and Operating Manual
by scanning the QR code:
http://som4.me/orig-rdcvision-plus-revb
For other language versions, see:
www.sommer.eu
1.3 Description of the product type
This product is a control unit for motor-operated roller
doors. It has been constructed according to state-of-the-art
technology and recognised technical regulations.
1.4 Target groups of the Installation
and Operating Manual
The installation and operating manual must be read and
observed by everyone assigned with one of the following
tasks or using the device:
• Installation
• Initial operation
• settings
• usage
• care and maintenance
• testing
• Troubleshooting
• disassembly and disposal
1.5 Explanation of warning symbols
and notes
The warnings in this installation and operating manual are
structured as follows.
Hazard
symbol
Signal word
Type and source of hazard
Consequences of the hazard
► Preventing/avoiding the hazard
The hazard symbol indicates the hazard. The signal word
is linked to a hazard symbol. The hazard is classified into
three classes depending on its danger:
DANGER
WARNING
CAUTION
There are three different classifications of hazards.
DANGER
Describes an immediate danger that may
lead to serious injury or death
Describes the consequences of the danger
to you or other persons.
► Preventing/avoiding the hazard
Bekijk gratis de handleiding van Sommer RDC Vision+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sommer |
| Model | RDC Vision+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5752 MB |
