Solis S6-EH3P10K02-NV-YD-L handleiding
Handleiding
Je bekijkt pagina 14 van 107
Third-party grid-tied inverter can be connected via AC-Gen port.
With third-party grid-tied inverter connected to the system, it is recommended that:
Grid-tied inverter power＜ rated AC power of S6 inverter.
In on-grid scenario, when the third-party grid-tied inverter is connected, the system
cannot control the output power of the third-party grid-tied inverter, so Feed-in limitation
cannot be realized.
In off-grid scenario, the third-party grid-tied inverter must be configured with the correct
grid code and equipped with over-frequency load shedding and under-frequency load
rising functionalities. These features allow the system to dynamically adjust the frequency,
effectively controlling the output power of the grid-tied inverter.
The Gen port has extended power, which can be used as Smart load output.
You can use the smartload function to connect critical loads to the backup port and
non-critical loads to the Gen port. This allows you to manage the power supply of
different loads when off-grid.
When the battery SOC/Volt reach the ON set value, the smart port will supply power to
the load. When the battery SOC/Volt drops to OFF SOC/Volt, it will cut off the power of
the load.
1.6.5 System with Smartload
Figure 1.9
Battery
PV Module
Phone
Backup Load
CT/Smart Meter Power Meter
Grid
Grid Load
SolisCloud
APP Web
Power Line
Signal Line
Smartload
User Manual
1. Introduction
10
Bekijk gratis de handleiding van Solis S6-EH3P10K02-NV-YD-L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Solis |
| Model | S6-EH3P10K02-NV-YD-L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11273 MB |
