Soler & Palau UTBS PRO-REG ECOWATT Handleiding (96 Pagina's)

Handleiding

52

11.4.3. Temperature set point adaptation vs. outdoor temperature

Constant supply air T°C with out-

door T°C compensation

Heating mode

Controller operation is similar to ﬁ rst case. In this

case, main difference is deﬁ ning a compensation

curve deﬁ ned from factory with 8 set points instead

of ﬁ xing a single temperature set point.

Compensation curve

The supply set point is

then adapted with respect

to this curve. At any time,

from the main screen

you can manually change

the supply temperature

(range of +/-3ºC).

11.4.4. Automatic control mode

Depending on the temperatures the controller select the most suitable

temperature control mode, between “Supply temperature control with

compensation for outdoor temperature” and “Room temperature con-

trol”.

11.5. INITIAL TEMPERATURE SETPOINT

To set the setpoint temperature to maintain, keep the following secuence:

Once selected the setpoint temperature.

Bekijk gratis de handleiding van Soler & Palau UTBS PRO-REG ECOWATT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.