Soler & Palau DUOVENT MODULAR DV handleiding
Handleiding
Je bekijkt pagina 15 van 46
Ventilation units with heat recuperation
DUOVENT
®
MODULAR DV/RV
15
3.6 DECLARATION OF CONFORMITY
This type of product was tested by the Authorized Person of EZU Prague, and a certificate was issued for it. For a unit of the above type, within
the meaning of Act No. 22/1997 Coll. as amended, issued a "Declaration of Conformity".
4. TRANSPORT, STORAGE, ACCEPTANCE
On the loading surface of the vehicle, the unit must be sufficiently secured against slipping and tipping over.
The unit is wrapped in PE foil and placed on transport beams. The unit is fixed to the transport beam by means of sheet metal clamps and
screws. The unit is always shipped in 3 separate blocks. The connection of individual blocks is carried out only after transport to the destination in
the building (air conditioning engine room or roof).
detail of the transport beam expedition blocks of DUOVENT
®
MODULAR DV/RV units
When loading and unloading with a forklift, lift the unit by attaching it to the bottom edge of the base frame or through pre-prepared holes in the
unit frame. When transporting the unit, it is necessary to support the unit on the underside over the entire surface to prevent damage and to pay
attention to the condensate outlet opening on the underside of the unit.
transport of the DUOVENT
®
MODULAR unit block using a forklift
CAUTION!
!
The holes in the frame and legs are not intended for the unit
hinging.
Bekijk gratis de handleiding van Soler & Palau DUOVENT MODULAR DV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Soler & Palau |
| Model | DUOVENT MODULAR DV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14752 MB |
