SolaX Power T-Bat H9.0 handleiding
Handleiding
Je bekijkt pagina 23 van 24
38
39
7 Decommissioning
7.1 Dismantling the Battery
Shutting down the battery unit
Disconnect the cables betweenthe BMS and inverter
Disconnect the series wiring terminal on the battery
Disconnect the cables
7.2 Packing
Pack the BMS and battery modules in the original packaging.
If the original packaging is no longer available, use an equivalent carton or box that
meets the following requirements:
Suitable for loads over 154.32lb
Properly closed and sealed
7. Decommissioning
Ÿ
Ÿ
Ÿ
Ÿ
Ÿ
8.Maintenance
8 Maintenance
-If the ambient temperature for storage is -4-113°F, recharge the batteries
at least one time every 3 months.
-If the ambient temperature for storage is -4-68°F, recharge the batteries
at least one time every 6 months.
-If the battery is not used for more than 9 months, the battery must be
charged to at least SOC 50 % each time.
-When installing the battery for the first time, the manufacturing date
between battery modules should not exceed 3 months.
-If the battery is replaced , the SOC between the batteries used
should be as consistent as possibe, with a maxium difference of ±5 %.
-If you want to expand your battery system capacity, please make
sure your existing system capacity's SOC is about 40%. The
expansion battery is required to be manufactured within 6 months; If
more than 6 months, recharge the battery module to about 40%.
Bekijk gratis de handleiding van SolaX Power T-Bat H9.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SolaX Power |
| Model | T-Bat H9.0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3706 MB |
