SolaX Power T-Bat H9.0 handleiding
Handleiding
Je bekijkt pagina 21 van 24
34
35
5. Commissioning
5. Commissioning
5.2.2 Battery Module (HV10230)
5.3 Shutting Down T-BAT System
To shut down the system, follow the steps described below:
1) Turn off the breaker between the inverter and T-BAT System
2) Long press 10s to shut down the BMS
3) Turn off the system by moving the circuit breaker switch to the OFF position
4) Ensure that every indicator on the T-BAT system is off
5) Disconnect the cables
No.
1
2
3
4
Mode
Active
Protection
Fault
Upgrade for theBMS
Status of battery module
Green LED flashes once every 5 sec
Yellow LED flashes once every 5 sec
Red LED flashes once every 5 sec
Red, Green and Yellow LED flash
S
S represents independent status indicators. The status of S has the same meaning
for battery modules in the following table.
Note: The battery system is active only when both S are flashing in Green LED
every 5 seconds.
NOTE!
After powering off the BMS, the LED lights for S will keep flashing
for 20 minutes.
alternately
Bekijk gratis de handleiding van SolaX Power T-Bat H9.0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SolaX Power |
| Model | T-Bat H9.0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3706 MB |
