SolaX Power T-Bat H 23 handleiding
Handleiding
Je bekijkt pagina 11 van 22
4. Installation
4. Installation
16
17
4.4.4 Battery Installation Steps
It is recommended that the space between battery packs is more than
300mm.
Steps (for T-BAT H 5.8 or HV11550):
Make sure the wall is strong enough to withstand the weight of battery.
Step 1: fix the wall bracket (H or G1) on the wall
Ÿ Use the wall bracket as a template to mark the position of the 5 holes
Ÿ Drill holes with φ10 driller, make sure the holes are deep enough (at least
50mm) for installing and tightening the expansion bolts (J or I1)
Ÿ Install the expansion bolts in the wall, and tighten the screws on the bracket
by using the screw driller.
Step 2: Match the battery with the wall bracket
Ÿ Lift the battery to the wall bracket
Ÿ Hang the battery over the wall bracket, move the battery close to the wall
and match it on the wall bracket
Step3: Lock the joint between hanging board and wall bracket with M5
combinationscrew (I or H1).
380<height<650mm
Note: Keep the distance from installation point to the floor less than 650mm.
30<height<300(mm)
Side view of hanging the battery on
the wall bracket.
Bekijk gratis de handleiding van SolaX Power T-Bat H 23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SolaX Power |
| Model | T-Bat H 23 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2974 MB |
