SolaX Power T-Bat H 17.3 handleiding
Handleiding
Je bekijkt pagina 18 van 22
30
31
5 Commissioning
5.1 Configuring Battery System
The DIP switch is used to configure the number of battery packs which are
communicating to Inverter. The detailed configuration information is shown as
follows:
0
1
2
3
4
5
6
7
Configuration activated by inverters
0- Matching T-BAT H 5.8 (default)
1- Matching T-BAT H 5.8 + 1*HV11550
2- Matching T-BAT H 5.8 + 2*HV11550
3- Matching T-BAT H 5.8 + 3*HV11550
The black-start function is only used in the off-grid environment when there is no
other power supply.
Note: if the battery is started in black-start mode, although there is no BMS
communication, the port still has high voltage and there is a risk of electric
shock!
After the black-start mode is started, if the BMS communication couldn't be built
within 3 minutes , the black-start fails.
4- Matching T-BAT H 5.8
5- Matching T-BAT H 5.8 + 1*HV11550
6- Matching T-BAT H 5.8 + 2*HV11550
7- Matching T-BAT H 5.8 + 3*HV11550
Black-start configuration
Ø
5. Commissioning
5. Commissioning
NOTE!
When powering on the BMS, the system will start self-testing. If the
buzzer bips, it means DIP configuration fault or communication failure
occurs. If the buzzer bips, please check if the number of battery packs is
corresponding to the DIP configuration, and also check if the RS485
communication cables are correctly connected. After checking above
two situations, press the POWER button to power on, and press the
POWER button again 10s later. In addition: The buzzer will only alarm on
the corresponding fault during the power-on self-test. When the self-
test is completed, it won't bip again even if the same fault occurs.
NOTE!
Frequently pressing the POWER button may cause system error. Please
make sure at least 10 seconds is left before you pressing the POWER
button the second time.
5.2 Commissioning
Bekijk gratis de handleiding van SolaX Power T-Bat H 17.3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SolaX Power |
| Model | T-Bat H 17.3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2974 MB |
