Solac Solution EX6190 handleiding
Handleiding
Je bekijkt pagina 6 van 36
English
Citrus juicer
SOLAC SOLUTION EX6190
DESCRIPTION
A Press cone cover
B Big cone
C Small cone
D Stainless steel filter
E Housing
F Lever
G Juice deposit
H Anti-drip valve
USE
AND CARE:
- Fully unroll the appliance’s power cable before
each use.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not move the appliance while in use.
- Do not use the appliance if it is tipped up and do
not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Store this appliance out of the reach of children
and/or those with reduced physical, sensory or
mental abilities or those unfamiliar with its use
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer’s liability null and void.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product’s packaging has
been removed.
- Before using the product for the rst time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Cut the citrus fruit/s to be squeezed in half.
- Place a glass under the anti-drip valve.
- NOTE: The anti-drip valve can be opened or
closed as required (Fig.1).
- Turn on the appliance by pushing down with the
pressing handle on the piece of citrus fruit, once
it has been placed on the juicing cone.
- To stop the appliance, simply stop applying
pressure to the cone.
- Remove the cone and strainer assembly in
order to empty the jar.
- NOTE: If you process large quantities of fruit,
you will need to clean the lter and remove the
residual pulp on a regular basis.
- NOTE: The bigger cone is for bigger citrus like
oranges, and you can press with the lever; the
smaller cone is for small citrus like lemon, and
you have to press with your hand directly on the
cone.
- Pulp regulation lter
- This juicer includes a lter that allows you to
adjust the pulp to your liking, to use this lter
you must follow these steps:
- Remove the stainless steel lter
- Place the plastic pulp regulation lter correctly.
- NOTE: To make cleaning process easier, the
pulp lter, which is composed of two pieces,
can be disassembled. To reassemble-it must
be taken into account that the regulator must
be between the two limiting walls and exert
pressure between the two pieces.
- Once you have nished using the appliance:
- Unplug the appliance from the mains.
- Clean the appliance.
CLEANING
- Disconnect the appliance from the mains before
undertaking any cleaning task.
- Clean the motor base with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the motor base in water or any
other liquid or place it under running water.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance’s useful life
and could become unsafe to use.
- The following pieces may be washed in a dish-
washer (using a soft cleaning program):
- Press cone cover
- Big cone
- Small cone
Downloaded by: pd-oliana on 06-09-2022 12:25 CEST
Bekijk gratis de handleiding van Solac Solution EX6190, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Solac |
| Model | Solution EX6190 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3212 MB |