Handleiding
Je bekijkt pagina 14 van 50
14
español english français portuguese deutsch italiano
ADJUSTING THE VOLUME
1. Rotate the VOLUME knob on the unit to increase or decrease the music volume.
2. Rotate the MIC VOL. knob on the unit to increase or decrease the microphone volume.
BASS ADJUSTMENT
Press the SUPER BASS button on unit to increase the bass eect.
EQUALIZER (EQ) FUNCTION
This unit has a built-in equalizer system, press the EQ button on unit to select a setting that best matches the
music style: FLAT, CLASSIC, ROCK, POP and JAZZ.
USB CHARGING
This unit provides a 5V 1A USB charging port for charging your smart phone. Connect the USB cable of your
smart phone to the USB CHARGE port for charging.
MICROPHONE ECHO ADJUSTMENT
Press the ECHO button on unit turn on or o the microphone echo eect.
FLASHING LIGHT
There are 9 modes for the DISCO LED lighting. Press the LIGHT button to choose the light modes. The
decoration LED light around the speaker will be always auto-changing between dierent colors smoothly. To
inactivate the light, press the LIGHT button until “OFF” showed on the display.
L-1: Blue LED will be on constantly when it is selected.
L-2: Red LED will be on constantly.
L-3: Green LED will be on constantly.
L-4: Purple LED will be on constantly.
L-5: Light green LED will be on constantly.
L-6: Light blue LED will be on constantly.
L-7: White LED will be on constantly.
L-8: 7 colors LED ash follow the music rhythm.
L-9: 7 colors auto change smoothly
There is LED lighting around the volume knobs. Press and hold the LIGHT button to turn on or o the light.
RADIO OPERATION
Listen to FM radio broadcasts. Press the FUNCTION / button on the unit, the display reads FM and the
radio frequency.
Note: in order to get the best reception, extend the FM ANT. on the rear of the unit before use to its full length.
TUNING TO A RADIO STATION
If you know the station frequency that you want to tune to directly:
• Tune to a station by press the /TUN.+ or /TUN.- button repeatedly. The station frequency is shown on
the display.
AUTOMATIC TUNING STOP
Press and hold the /TUN.- BUTTON or /TUN.+ BUTTON to start tuning, tuning stop automatically when
a station is received.
AUTO PRESET MEMORY / SCAN
To scan for stations within reception range and save them to preset memory automatically, press and hold the
/ PAIR / SCAN. button. After the unit is nished scanning, the unit will automatically tune to preset number
1 (P01). To tune to a preset station:
• To tune to the next preset station, press the 10/MEM./FOLD.+ button.
• To tune to the previous preset, press the 10/MEM./FOLD.- button.
MANUAL PRESET MEMORY OPERATION
Choose which stations to save in preset memory instead of scanning automatically.
1. Use the / TUN. + or /TUN.- button to tune to the station that you want to save as a preset (e.g., 93.1).
2. Press the P-MODE/M. button. “P01” will ash on the display to indicate that you are saving the station as
Preset Memory 01. (To change the preset memory number, press the 10/MEM./FOLD.+ or 10/MEM./FOLD.-
buttons.)
3. Press the P-MODE/M. button to nish saving the station (e.g., P01 is now set to 93.1).
4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations.
USB OPERATION
1. Press the FUNCTION / button on unit to select “USB” mode.
2. Plug the USB memory stick to the USB port on top of the unit(The unit can support up to 32G USB device).
Playback will start automatically from Track 1.
Bekijk gratis de handleiding van Sogo SS-8770, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | SS-8770 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 5793 MB |
