Handleiding
Je bekijkt pagina 13 van 40
13
español english français portuguese deutsch italiano
Installation of unit before rst use
1. Clean the measuring cup, cover and jar(except main body)and before rst use and so on every single
use.
2. Do not plug in the unit until the jar is ready to be mount on to the motor.
3. Firstly mount the blade base into bottom part of the jar and lock it rmly.
4. Put the jar base on the top of motor mainbody, please pay attention to match the position of jar and the
bulge of the motor main body.
5. Put the cover on top of the jar and pus hit town. Insert the closure into the cover and turn till it locks into
place.
6. Place the measuring cup on the center of lid and x it well.
7. This unit have been designed in such a way for safety purpose that it wont work until the jar has been
xed on to the motor.
8. For user safety purpose this blender has dual lock system, one is jar with motor lock and other is lid
lock system and until the jar with motor and and lid with the jar has not been locked in a proper way it
wont work.
Operational process
The jar blender can be used to blend, grind and mix various type of ingredients and to crush the ice, also
one can make soups, shakes, smoothies.
1. Connect the power plug with wall outlet.
2.Fill the jug with the desired food ingredients. To make ensure the quantity of water or any type of liquid
shouldn´t spill out from jar always try to ll it lesser than the máximum quantity indicated.
WARNING: Do not use the unit without any food ingredients inside the jar.
3. keep the knob position onto the “0” untill the jar is mounted on to the motor.
4. close the jar with the lid and Place the measuring cup on the center of lid and lock it properly
5. Turn the knob on to desired speed(P— pulse,1—low speed,2—high speed)
Keep the knob on the chosen speed position until you get the desired thickness of the ingredients and
once you get it turn the knob on to the position “0” and take out he plug.
Cleaning and storage
• In addition to this, user must refer to the security precautions.
• Do not clean Motor main body, power cord and plug with water.
• Clean the motor base with a soft, wet piece of cloth and some mild cleaning agent.
• Fill the jug half-full with hot water and a little cleaning agent. Let the unit run on speed 2 until the jug is clean.
• The Blade base is detachable part of the jar, so carefully turn around the base to detach and Take out
from the jar
• Now clean jug, cover, closure, base and blades with sealing ring with hot water and some cleaning
agent. Dry well before re-using. Caution! The blades inside of the jug are very sharp.
• Never use aggressive cleaning agents.
WARNING : Do not to touch the sharp blade. When clean, please wipe by dishcloth, to avoid any
type of injury.
WARNING: Do not put hot ingredients into the jar. Before any food preparation, allow food to cool down
for a few minutes.
CAUTION: Before you eat or serve blen¬ded food, please always check for ingredients that might have
not been blended adequately.
CAUTION: Maximum time of food processing should not exceed 1 Minute of continuous use. In case the
food which needs to be blended further to achieve the required smoothness use the applinace dividing in
various cycles with few second pauses in between each cycle to avoid permanent damage to the motor.
Tecnincal specication
Model No.: SS-5088, SS-5088-W
Voltage / Frequency: 220-240V~ 50-60Hz
Power: 500W
Jar capacity: 1.5L
Bekijk gratis de handleiding van Sogo SS-5088, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | SS-5088 |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 3817 MB |
