Sogo SS-21835 handleiding
Handleiding
Je bekijkt pagina 22 van 152
22
ENGLISH
7. CLEANING AND MAINTENANCE
CAUTTON: Stay away of moving blades. If the clip is not xed properly on the blade for any reason,
turn the fan o immediately. This might result in injury.
Cleaning:
1. Before cleaning, turn the unit o, cut o the power supply from electrical outlet and wait for the unit
to cool down.
2. To clean the unit, use a soft cloth to wipe o any dust.
3. Do not try to open the unit without a licensed electrician. Improperly installed the unit can be
dangerous.
4. Clean the unit at least once a year.
Maintenance:
1. Have your product repaired by a licensed electrician
2. This electric product is in accordance with the relevant safety requirements. Repairs should only
be carried out by licensed electricians using original spare parts, otherwise this may result in
considerable danger to the user.
3. Please contact the store which you bought the product for after sale services if any.
TROUBLESHOOTING
Fan does not work 1. Check all fuses or circuit breakers, if something disrupting the power supply to the
fan.
2. Turn o electrical power and check all wire connections to fan and in switch housing.
It must be carried out by a electrician.
Fan turns but airow is
inadequate
1.The fan may be running in reverse, so air is going upward.
2.The room may contain items that obstruct the air ow.
3.The fan may be too small for size of the room.
Fan is noisy 1. Make sure that the screws fastening blade arm to motor are tight and the lock was-
hers provided for that purpose have been used.
2. Lower the upper canopy to ensure a separation from the ceiling of no less than 3mm
to reduce Noise.
3. Check to see if any of the blades are cracked. If yes, replace all of the blades.
4. If this is the rst use, leave the fan on for at least 8 hours. If the mechanical noise
continues after this period, contact certied electrician.
Balancing – Wobbling problems during fan operation
If the fan body wobbles during its operation, this is not a sign of malfunctioning (even if it
wobbles a few centimetres). To reduce wobbling, you can turn o the fan, and:
1. Check that all blades are properly fastened by tightening their screws.
2. Check the distance between each blade and the ceiling. Measurements to the ceiling can
be carried out as shown in the following diagram. If variations exist and you have already
correctly tightened the screws, check that all blades have the same shape. If any of
them have a shape that is visibly dierent, this may be causing an imbalance during fan
operation. If you have completed the previous steps and the wobbling has not resolved,
you should apply dynamic balancing with the kit provided, as explained below:
3. Turn the fan to the highest speed to generate the maximum amount of oscillation.
4. Turn o the fan. Choose a random position of the leaf shelf plate (see picture) and put
down the balance weight.
5. Turn on the fan and check whether the swing has improved or worsened. Close it again, if
the swing does not improve, please adjust the position of the balance weight. Repeat this
process and determine the best position to reduce swing.
6. Tear o the double-sided tape of the weighing block and stick it to the nal position.
Bekijk gratis de handleiding van Sogo SS-21835, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | SS-21835 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 19928 MB |
