Sogo SS-21825 handleiding
Handleiding
Je bekijkt pagina 12 van 42
12
español english français portuguese deutsch italiano
REMOTE CONTROL CNNECTION
WARNING: To avoid personal injury or damage, be sure to turn o the power to the main fuse box before wiring.
ASSEMBLING
Make sure you have all the components before beginning installation. To prevent damage, attach the motor
to the support rod on a soft surface or use the polystyrene contained in the package.
Yellow/Green
Bracket
Receiver place
Remote
control
Yellow/Green
1. Open the carton box and take out the fan. (Fig.1)
2. Assemble the support plate on the ceiling using two
or more screw anchors and appropriate washers
Attention the provided screws are for wood joist and
concrete ceiling. (Fig.2)
3. Screw the blade on the blade plate according to the
screw hole. (Fig.3)
4. Tighten the blade connection according the blade
hole. (Fig. 4)
5. Tighten the motor cover on the top motor hanger.
(Fig. 5)
6. Insert the support rod through the upper cap and
lower cap.
7. Insert the electric cables coming out from the motor
through the support rod and connect them to the
screw terminal placed on the top of support rod.
8. Fix the support rod to the motor using the pin and
pins nut. (Fig.6)
9. Hang the fan on the hook on the support plate and
connect the electrical cable coming from the ceiling
to the screw terminal placed on the top of support
rod make sure the receiver must be insert into
support plate (see Remote control connection).
10. Slide upwards the upper cap and x it with the
screw. (Fig.7)
11. Slide downwards the lower cap it must be supported
by the motor Fix it with the screw. (Fig.7)
12. Remove the screws from connect plate of the motor
please organize all the wires carefully into connect
plate.
13. Assemble and align the holes on the back of LED light to the three screws on the connect plate of
motor. (Fig.8)
14. Then tighten the three screws on the LED plate connect the connector together with the motor wire
please make sure the light kit ca nt be moved after tighten the screws. (Fig.8)
15. Place the lamp shade on the fan. (Fig.9)
Bekijk gratis de handleiding van Sogo SS-21825, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | SS-21825 |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 4962 MB |
